How to Root Samsung Galaxy Note 2 T-Mobile

In this article we will show you how to root Samsung Galaxy Note 2 T-Mobile. Here’s the complete procedure.

There are various Network Carriers which provide the network to the mobile phones. Some of them are Verizon, AT&T, T-Mobile, BTC, Digicel, Nextel, Claro, Tigo, etc. So if you are using a carrier and want to unlock any other carrier for free then just follow the steps given below in order to do so.

Samsung Galaxy Note 2 is one of the best phones launched by Samsung. It Contains 1.6 GHz Cortex-A9 Quad-core processor with 2 GB RAM, Android 4.1.1 Jelly Bean, 8MP Rear and 1.9MP Front camera, and many more exciting features.

So, here we will tell you how to root Samsung Galaxy Note 2 T-Mobile. But before starting with the procedure, please read disclaimer, pre-requisite & other important notes. So, let’s begin with this.

Disclaimer:

By rooting and installing a 3rd party custom ROM the warranty of your Samsung Galaxy Note 2 T-Mobile will be voided. We are not responsible if anything wrong happens in between the process. And just to be sure we would like to tell you that this article is only for Samsung Galaxy Note 2 T-Mobile, so don’t try it on any other mobile or if you want to then try it on your own risk.

Pre-requisite:

  1. Your Samsung Galaxy Note 2 T-Mobile must be at least 70-80% charged.
  2. Enable the USB debugging mode (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install drivers of Samsung Galaxy Note 2 T-Mobile or you can download Samsung Kies.

Steps to be followed to root Samsung Galaxy Note 2 T-Mobile are:

Step 1:How to Root Samsung Galaxy Note 2 T-Mobile

First download Rooting Kit of Samsung Galaxy Note 2 T-Mobile, CWM recovery & extract it on your PC.

Step 2:

Now Switch Off your Samsung Galaxy Note 2 T-Mobile, remove battery & then plug it back. & boot your Samsung Galaxy Note 2 T-Mobile in download mode (you can do this by pressing together Volume Down & Home button), & after that press Power button of your Samsung Galaxy Note 2 T-Mobile till you get the android logo. To confirm press the Power button again.

Step 3:

Now from the Extracted folder, open up Odin.exe & connect your Samsung Galaxy Note 2 T-Mobile to computer using USB cable. If you are doing it correctly then an ID:COM box will become blue.

Step 4:

Now click on the PDA button & select “recovery.tar” from the folder you’ve extracted earlier.

Step 5:

Now ensure that Auto Reboot & F. Reset Time options are ticked on Odin.

Step 6:

Now click Start button to initiate installation process. It will take some time so wait for completion of installation.

Step 7:

Now if you can see the PASS message then your Samsung Galaxy Note 2 T-Mobile will reboot itself & when the mobile Vibrates then remove battery immediately & start your Samsung Galaxy Note 2 T-Mobile after 2 minutes.

Now your Samsung Galaxy Note 2 T-Mobile is rooted & you can check Super app installed on your Samsung Galaxy Note 2 T-Mobile & if you need to verify, download the Root checker application to verify it yourself.

That’s all. You’ve successfully rooted your Samsung Galaxy Note 2 T-Mobile.

Hope this article about how to root Samsung Galaxy Note 2 T-Mobile helped you.

Finished!

Imagesource

Refer These:

How to Root Samsung Galaxy Note 2 on Mac

How to Root Samsung Galaxy Note 2 AT&T

How to Root Samsung Galaxy S3 Sprint 4.1.2

How to Root Samsung Galaxy Note 2 on Mac

In this article we will tell you how to root Samsung Galaxy Note 2 on Mac. Here’s the complete procedure.

Samsung Galaxy Note 2 is one of the best phones launched by Samsung. It Contains 1.6 GHz Cortex-A9 Quad-core processor with 2 GB RAM, Android 4.1.1 Jelly Bean, 8MP Rear and 1.9MP Front camera, and many more exciting features.

Rooting is a procedure to get the privileged control in Android subsystem. It is performed in order to overcome the limitations that are being implemented by the hardware manufacturers and carriers, so that they can access all of the settings that a normal user can’t, can run the apps that asks for admin permissions, or to alter some system applications.

So, here we will tell you how to root Samsung Galaxy Note 2 T-Mobile. But before starting with the procedure, please read disclaimer, pre-requisite & other important notes. So, let’s begin with this.

Disclaimer:

By rooting, warranty of your Samsung Galaxy Note 2 will be voided. We are not responsible if anything wrong happens in between the process. And just to be sure that this article is only for Samsung Galaxy Note 2, so don’t try it on any other mobile and if you want to then try it yourself.

Pre-requisite:

  1. Your mobile must be at least 70-80% charged.
  2. Enable the Debugging Mode(USB) (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install USB drivers of Samsung Galaxy Note 2 or you can download Samsung Kies.

Steps to be followed to root Samsung Galaxy Note 2 on Mac are:

Step 1:

Connect your Samsung Galaxy Note 2 on your Mac using the data cable provided with your Samsung Galaxy Note 2.

Step 2:

Just, download Motochopper file and paste it to your Mac’s desktop.

Step 3:

Now, open the terminal and type the following commands to start rooting your Samsung Galaxy Note 2.

  • cd Desktop
  • cd Motochopper
  • chmod 755 *
  • sudo sh run.sh

Step 4:

Once the scripting is started, just press enter to root your Samsung Galaxy Note 2 and don’t forget to allow the USB debugging.

Step 5:

Once the process is finished do not forget to press enter in order to reboot your Samsung Galaxy Note 2.

Step 6:

When your Samsung Galaxy Note 2 is finished rebooting, just open the app drawer of your Samsung Galaxy Note 2 and make sure you have SuperUser app already installed on your Samsung Galaxy Note 2. If you don’t have it, then you can download the app, and install it.

Step 7:

In order to confirm that your Samsung Galaxy Note 2 is rooted, install an app naming Titanium Backup, and check that whether you are getting a SuperUser request or not.

So, by following these simple steps you can root your Samsung Galaxy Note 2 on Mac.

Hope this article about how to root Samsung Galaxy Note 2 on Mac helped you.

Finished!

Imagesource

See Also:

How to Root Samsung Galaxy Note 2 AT&T

In this article we will tell you how to root Samsung Galaxy Note 2 AT&T. Here’s the complete procedure.

There are various Network Carriers which provide the network to the mobile phones. Some of them are Verizon, AT&T, T-Mobile, BTC, Digicel, Nextel, Claro, Tigo, etc. So if you are using a carrier and want to unlock any other carrier for free then just follow the steps given below in order to do so.

Samsung Galaxy Note 2 is one of the best phones launched by Samsung. It Contains 1.6 GHz Cortex-A9 Quad-core processor with 2 GB RAM, Android 4.1.1 Jelly Bean, 8MP Rear and 1.9MP Front camera, and many more exciting features.

So, here we will tell you how to root Samsung Galaxy Note 2 AT&T. But before starting with the procedure, please read disclaimer, pre-requisite & other important notes. So, let’s begin with this.

Disclaimer:

By rooting and installing a 3rd party custom ROM the warranty of your Samsung Galaxy Note 2 AT&T will be voided. We are not responsible if anything wrong happens in between the process. And just to be sure we would like to tell you that this article is only for Samsung Galaxy Note 2 AT&T, so don’t try it on any other mobile or if you want to then try it on your own risk.

Pre-requisite:

  1. Your Samsung Galaxy Note 2 AT&T must be at least 70-80% charged.
  2. Enable the USB debugging mode (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install drivers of Samsung Galaxy Note 2 AT&T or you can download Samsung Kies.

Steps to be followed to root Samsung Galaxy Note 2 AT&T are:

Step 1:

First download Rooting Kit of Samsung Galaxy Note 2 AT&T, CWM recovery & extract it on your PC.

Step 2:

Now Switch Off your Samsung Galaxy Note 2 AT&T, remove battery & then plug it back. & boot your Samsung Galaxy Note 2 AT&T in download mode (you can do this by pressing together Volume Down & Home button), & after that press Power button of your Samsung Galaxy Note 2 AT&T till you get the android logo. To confirm press the Power button again.

Step 3:

Now from the Extracted folder, open up Odin.exe & connect your Samsung Galaxy Note 2 AT&T to computer using USB cable. If you are doing it correctly then an ID:COM box will become blue.

Step 4:

Now click on the PDA button & select “recovery.tar” from the folder you’ve extracted earlier.

Step 5:

Now ensure that Auto Reboot & F. Reset Time options are ticked on Odin.

Step 6:

Now click Start button to initiate installation process. It will take some time so wait for completion of installation.

Step 7:

Now if you can see the PASS message then your Samsung Galaxy Note 2 AT&T will reboot itself & when the mobile Vibrates then remove battery immediately & start your Samsung Galaxy Note 2 AT&T after 2 minutes.

Now your Samsung Galaxy Note 2 AT&T is rooted & you can check Super app installed on your Samsung Galaxy Note 2 AT&T & if you need to verify, download the Root checker application to verify it yourself.

That’s all. You’ve successfully rooted your Samsung Galaxy Note 2 AT&T.

Hope this article about how to root Samsung Galaxy Note 2 AT&T helped you.

Finished!

Imagesource

See Also:

How to Root Samsung Galaxy S3 Sprint 4.1.2

In this tutorial we will guide you step-by-step on how to root Samsung Galaxy S3 sprint 4.1.2. Here are the complete details.

What is rooting?

Rooting is a process of giving the administrative control to the users Smartphone or any other device running android operating system. The basic reason behind rooting is to overcome the limitations of not being able to uninstall factory apps or restrictions of running some specialized apps and performing some extreme operations which is not permitted to ordinary end user of android system.

The best thing about Samsung is that software for rooting Samsung’s device is easily available on internet, for Galaxy S3 we have Odin from Samsung, but in this tutorial we will use new Casual Root ToolKit. This allows you to install custom ROM and Kernels on you Smartphone. Basically what we want to say is unblocking the bootloader gives unrestricted access to the Smartphone. In order to get rid of some unwanted stock applications, factory restrictions, or power up its performances and to make device run faster than usual, the best way is to root the Samsung Galaxy S3 sprint 4.1.2.

Benefits of Rooting an android devices

  • Rooting gives parental control of your android device.
  • Rooting allows you to uninstall unwanted stock apps along with installing non permitted apps.
  • Rooting gives benefit of improvement in the performance and also it enhances the speed of operating system of your Android device.
  • Through rooting you can update your Android device, without asking for permission from the manufacturer, using custom ROMs and upgrades.
  • Increase in the battery pack up of the Smartphone.
  • Stunning visual experience.
  • Upgrade in the baseband possibility after rooting the device.

Disclaimer

This tutorial is basically for Samsung Galaxy S3 sprint 4.1.2. Successful working of this procedure on any other device is still not confirmed. This tutorial’s application to any other device may produce some unwanted outcome. We are not bounded if anything happens wrong with your device after applying this procedure. So, if you want to go further then continue on your risk.

Just follow the simple steps given below:

Pre-Requisite

  • Disable all security programs like firewall & antivirus on Samsung Galaxy S3 sprint 4.1.2as well as on your PC.
  • Your device’s Battery should be fully charged or must be at least 80%.
  • Take all the necessary backups of all possible things like: SMS, videos, Images, Bookmarks, MMS settings, songs, Contacts etc.
  • You have to install USB drivers of Samsung Galaxy S3 sprint 4.1.2
  • Use a good conditioned USB port for connection between device & system with supplied USB cable of your device.
  • Enable USB debugging mode. To do so follows this. Go to Settings >> Applications >> Development >> Check this option ‘Enable USB Debugging’.
  • You must install the latest version of both Java SDK as well as Android SDK on the PC.

Steps for how to root Samsung Galaxy S3 sprint 4.1.2:

Step 1:How to Root Samsung Galaxy S3 Sprint 4.1.2

The first step is to download the following files

Step 2:

After downloading the file extract them using 7zip or WinZip or from whichever software you are using to get the .tar.md5 file, since Odin uses only this file, not the .img file.

Step 3:

Turn off the device and then boot it in the download mode. To do so press and hold the home button, volume down button and power button for a few seconds.

Step 4:

When you will be entering, a warning message will pop out and then press volume up button for passing it.

Step 5:

Run the Odin file downloaded in the desktop.

Step 6:

Use USB cable and connect the device with computer and just wait for a few seconds till ODIN software detects your device. When it will get detect, ID: COM will become yellow in color. A message will also pop out for successful connection.

Step 7:

If your device doesn’t get detected then try to connect it in different port or re-install driver.

Step 8:

Select PDA in Odin and choose

Step 9:

Please make sure that Auto F.Reset & reboot checkbox should be checked and the option re-partitioning should not be selected.

Step 10:

When all checks get done then press Start button in Odin, your process will begin now.

Step 11:

When rooting process get complete then your device will restart automatically and before that a pass message will appear.

Your Samsung galaxy S3 is now rooted successfully. You can try to install apps which requires the rooting permission.

FINISH!

Imagesource

Reference:

  1. How to Install Android 4.2.2 Jelly Bean on Sprint Samsung Galaxy 
  2. How to Root Samsung Galaxy Note 2 Verizon
  3. How to Root Samsung Galaxy Note 2 Sprint

How to Install Flash Player on Samsung galaxy S4

In this tutorial we will guide you on how to install flash player on Samsung galaxy S4. Here are the complete details about the procedure.

The Samsung Galaxy S4 is one of the best Android phones available in the market at present among other Smartphone. It has some amazing and pretty good features, along with stunning 5” SUPER AMOLED capacitive touch screen with 16million color, which is one of the best screens available till date. It also has excellent 13MP camera with stunning quality along with LED flash which offers you to make full HD videos. It also has a feature of DUAL shoot. This Samsung Galaxy S4 has brought us multi window mode feature. This feature enables us to use two different applications in two different windows simultaneously. This multitasking feature makes Galaxy S4 a brilliant Smartphone in its category. You can check various alerts without being bother to touch Samsung galaxy s4. All you have to so is to go into your device’s setting >> Motion and gesture >> Air gesture >>Quick glance >> make it ON.

Once you will have done that then wave your hand above the screen of device and you will be able to see this information:

  • Text messages
  • Battery Life
  • Current time.
  • Notification bar
  • Missed calls

But this will not let you directly to their location by taping them. This device also includes a special feature which let the user to control the device with eyes. With this feature you will be able to scroll down the screen. And while watching videos, screen will automatically pause when your face moves away from phone’s direction. The names of these features are:

For enabling these features navigate to the settings of your device then >> my device >> Smart screen and there you will see these options. Select any one or both according to your need. 

  • Check Smart Stay
  • Check Smart Pause 

Installing a flash player application on the Samsung Galaxy S4 is a very easy task as it does not require any hardcore work or method even it does not require any app for that. It only requires an internet connection for downloading.

Disclaimer

This tutorial is basically for Samsung Galaxy S4. Successful working of this procedure on any other device is still not confirmed. This tutorial’s application to any other device may produce some unwanted outcome. We are not bounded if anything happens wrong with your device after applying this procedure. So, if you want to go further then continue on your risk.

Just follow the simple steps given below:

Pre-Requisite

  • Your device’s Battery should be fully charged or must be at least 80%
  • You must have an internet connection for download purpose
  • You must also enable Installation of apps through unknown resources. And to do so navigate to the settings of your device and follow this: Settings >> Security >> Check this option “Unknown resources”, this will enable installation of apps from unknown resources.

Steps for how to install Flash player on Samsung Galaxy S4

Step 1:How to Install Flash Player on Samsung galaxy S4

First of all connect your device to internet. And then open any browser in your device.

Step 2:

Now go to this Link  or search for “Archives page for flash player”.

Step 3:

Now look for the option android archive for flash player.

Step 4:

Under that option select the link Flash Player 11.1 for Android 4.0 (11.1.115.54).

Step 5:

Automatic downloading of the apk file will get start. Close the browser whenever it get complete.

Step 6:

Now, Open the notification panel of the Samsung galaxy S4 and select the option install apk file of flash player.

Now you have successfully installed the Flash player on your Galaxy S4. ENJOY!

Imagesource

Reference:

  1. How to Install Android 4.3 Jelly Bean on Samsung Galaxy S3 I9300
  2. How to Update Software on Sony Ericsson Xperia X10
  3. How to Install Android 4.3 Jelly Bean on HTC One X AT&T

How to Install Android 4.3 Jelly Bean on Samsung Galaxy S3 I9300

In this article we will tell you how to install Android 4.3 Jelly Bean on Samsung Galaxy S3 I9300. Here’s the complete procedure:

Samsung Galaxy S3 is one of the best phones launched by Samsung. It Contains 1.4 GHz Cortex-A9 Quad-core processor with 1 GB RAM, Android 4.0.4 ICS, 8MP Rear and 2MP Front camera, and many more exciting features.

Note:

It is recommended that before starting with the topic you must read the disclaimer and pre-requisite.

Disclaimer:

By rooting, warranty of your Samsung Galaxy S3 will be voided. We are not responsible if anything wrong happens in between the process. And just to be sure that this article is only for Samsung Galaxy S3 I9300, so don’t try it on any other mobile and if you want to then try it yourself.

Pre-requisite:

  1. Your mobile must be at least 70-80% charged.
  2. Enable the Debugging Mode(USB) (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install USB drivers of Samsung Galaxy S3 or you can download Samsung Kies.

Steps to be followed to root Samsung Galaxy S3 I9300 are:

Step 1:

First, connect your Samsung Galaxy S3 I9300 to your PC using micro USB cable came with your Samsung Galaxy S3 I9300.

Step 2:

Now, download Android 4.3 (6c7ff815e7762f651ad6f8c74e5cb281093f1e0b.signed-yakju-JWR66V-from-JDQ39.6c7ff815.zip) file in your PC.

Step 3:

Transfer the downloaded files to your Samsung Galaxy S3 I9300.

Step 4:

Now, switch off your Samsung Galaxy S3 I9300 and disconnect it from your PC.

Step 5:

Now, open up your Samsung Galaxy S3 I9300 into CWM or TWRP Recovery mode (to open your Samsung Galaxy S3 I9300 in CWM or TWRP Recovery mode just press & hold Power & Volume Up & Home keys at same time).

Step 6:

Now, once you are entered into Recovery menu, it is recommended for you to perform Wipe Data/Factory Reset because of the completed installation of current Android version.

Note:

In case of CWM recovery, you have to use Volume key in order to navigate inside Recovery Mode. And in case of TWRP recovery, you have to use touchscreen in order to navigate inside Recovery Mode.

Step 7:

Now, don’t forget to Wipe Cache Partition – Select Wipe Cache Partition option from Menu and click on Yes in order to confirm.

Step 8:

Now, from main menu inside Recovery Mode, select the option “install zip using sdcard”, and then select the option “choose zip using internal sdcard”, and then select Android_4.3_6c7ff815e7762f651ad6f8c74e5cb281093f1e0b.signed-yakju-JWR66V-from-JDQ39.6c7ff815.zip and then select “Yes” to install the Android 4.3 Jelly Bean on your Samsung Galaxy S3 I9300.

Step 9:

Now, after the completion of the installation process, just go back to the main menu of Recovery Mode.

Step 10:

Now, click on reboot system now in order to reboot your Samsung Galaxy S3 I9300.

Step 11:

And now you have successfully updated your Samsung Galaxy S3 to Android 4.3 Jelly Bean.

So this is how you can install Android 4.3 Jelly Bean your Samsung Galaxy S3 I9300. Just follow the simple steps and your Samsung Galaxy S3 I9300 will be updated to Android 4.3 Jelly Bean.

Hope this article about how to install Android 4.3 Jelly Bean on Samsung Galaxy S3 I9300 helped you.

Finished!

References:

How to Update Software on Sony Ericsson Xperia X10

In this article we will tell you how to update software on Sony Ericsson Xperia X10. Here’s the complete procedure:

Sony Xperia X10 is one of the best phones launched by Sony. It Contains 1.5 GHz Qualcomm MSM8260 Snapdragon Dual-core processor with 1 GB RAM, Android 2.3.5 Gingerbread, 12MP Rear and 1.3MP Front camera, and many more exciting features.

Rooting is a procedure to get the privileged control in Android subsystem. It is performed in order to overcome the limitations that are being implemented by the hardware manufacturers and carriers, so that they can access all of the settings that a normal user can’t, can run the apps that asks for admin permissions, or to alter some system applications.

So, here we will tell you how to update software on Sony Ericsson Xperia X10.

Note:

Before starting with the procedure, please read disclaimer, pre-requisite & other important notes.

Disclaimer:

By rooting and installing a 3rd party custom ROM the warranty of your mobile will be voided. We are not responsible if anything wrong happens in between the process. And just to be sure we would like to tell you that this article is only for Sony Ericsson Xperia X10, so don’t try it on any other mobile or if you want to then try it on your own risk.

Pre-requisite:

  1. Your mobile must be at least 70-80% charged.
  2. Enable the USB debugging mode (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.

So, let’s begin with rooting your Sony Ericsson Xperia X10.

Steps to be followed to update software on Sony Ericsson Xperia X10 are:

Step 1:

First download the CM10 file and also the Google App Package (since it is unavailable in update).

Step 2:

Now save both files on SD card of your Sony Xperia X10 through your PC, either using copy-paste method or by using drag-n-drop method.

Step 3:

Just remember the place where you have stored the files.

Step 4:

Now, switch off your Sony Xperia X10 and open it in the recovery mode.

Step 5:

To open your Sony Xperia X10 in recovery mode hold the back key of your Sony Xperia X10 while turning on power.

Step 6:

Now, in recovery mode wipe the previous data, make sure you’ve backed up your data.

Step 7:

Now, in order to wipe the data, click on “wipe data factory reset” and then click on “wipe cache partition”.

Step 8:

Now, you’ve just prepared your Sony Xperia X10 for updating the software.

Step 9:

Now, from the current menu select the option “install zip from card” and then select “zip through card”.

Step 10:

Now, first pick the update file and install it in your Sony Ericsson Xperia X10

Step 11:

Now, just do the same for the Google App Package.

Step 12:

Whenever the process completed just click on “Go Back” and then click on “Reboot System Now”.

That’s all. You’ve successfully updated the software of your Sony Ericsson Xperia X10.

Hope this article about how to update software on Sony Ericsson Xperia X10 helped you.

References:

How to Install Android 4.3 Jelly Bean on HTC One X AT&T

In this article we will tell you how to install Android 4.3 Jelly Bean on HTC One X AT&T. Here’s the complete procedure.

HTC One X is one of the best phones launched by HTC. It Contains 1.5 GHz Tegra 3 Quad-core processor with 1 GB RAM, Android 4.0.4 ICS, 8MP Rear and 1.3MP Front camera, and many more exciting features.

Note:

Before starting with the steps just make sure that your HTC One X AT&T is rooted & ClockWorkMod Recovery is installed on it.

It is recommended that before starting with the topic you must read the disclaimer and pre-requisite.

Disclaimer:

By rooting, warranty of your HTC One X AT&T will be voided. We are not responsible for anything wrong happens to your HTC One X in between the process. And just to be sure that this article is only for AT&T version of HTC One X AT&T, so don’t try it on any other mobile and if you want to then try it yourself.

Pre-requisite:

  1. Your mobile must be at least 70-80% charged.
  2. Enable the Debugging Mode(USB) (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install USB driver of HTC One X AT&T.

Steps to be followed to install Android 4.3 on HTC One X AT&T are:

Step 1:

First, connect your HTC One X AT&T to your PC using micro USB cable came with your HTC One X AT&T.

Step 2:

Now, download Android 4.3 (6c7ff815e7762f651ad6f8c74e5cb281093f1e0b.signed-yakju-JWR66V-from-JDQ39.6c7ff815.zip) file in your PC.

Step 3:

Transfer the downloaded files to your HTC One X AT&T. How to Install Android 4.3 Jelly Bean on HTC One X AT&T

Step 4:

Now, switch off your HTC One X AT&T and disconnect it from your PC.

Step 5:

Now, open up your HTC One X AT&T into Recovery mode (to open your HTC One X AT&T in Recovery mode just press & hold Power & Volume down at same time).

Step 6:

Now, once you are entered into Recovery menu, it is recommended for you to perform Factory Reset/Wipe Data because of the completed installation of current Android version.

Step 7:

Now, don’t forget to Wipe Cache Partitioning – Select Wipe Cache Partitioning option from Menu and click on Yes in order to confirm.

Step 8:

Now, from main menu inside Recovery Mode, select the option “install zip using sdcard”, and then select the option “choose zip using internal sdcard”, and then select Android_4.3_6c7ff815e7762f651ad6f8c74e5cb281093f1e0b.signed-yakju-JWR66V-from-JDQ39.6c7ff815.zip and then select “Yes” to install the Android 4.3 Jelly Bean on your HTC One X AT&T.

Step 9:

Now, after the completion of installation process, just revert back to main menu of Recovery Mode.

Step 10:

Now, click on restart system now in order to reboot your HTC One X AT&T.

Step 11:

And now you have successfully updated your HTC One X AT&T to Android 4.3 Jelly Bean.

So this is how you can install Android 4.3 Jelly Bean your HTC One X AT&T. Just follow the simple steps and your HTC One X AT&T will be updated to Android 4.3 Jelly Bean.

Hope this article about how to install Android 4.3 Jelly Bean on HTC One X AT&T helped you.

Finished!

Imagesource

Reference:

How to Install Android 4.2.2 Jelly Bean on Sprint Samsung Galaxy S3 L710

In this article we will tell you how to install Android 4.2.2 Jelly Bean on Sprint Samsung Galaxy S3 L710. Here’s the complete procedure.

Samsung Galaxy S3 is one of the best phones launched by Samsung. It Contains 1.5 GHz Cortex-A9 Quad-core processor with 1 GB RAM, Android 4.0.4 ICS, 8MP Rear and 2MP Front camera, and many more exciting features.

Note:

Before starting with the steps just make sure that your Samsung Galaxy S3 is rooted and ClockWorkMod Recovery is installed on it.

It is recommended that before starting with the topic you must read the disclaimer and pre-requisite.

Disclaimer:

By rooting, warranty of your Samsung Galaxy S3 will be voided. We are not responsible if anything wrong happens in between the process. And just to be sure that this article is only for Sprint version of Samsung Galaxy S3 L710, so don’t try it on any other mobile and if you want to then try it yourself.

Pre-requisite:

  1. Your mobile must be at least 70-80% charged.
  2. Enable the Debugging Mode(USB) (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install USB drivers of Samsung Galaxy S3 or you can download Samsung Kies.

Steps to be followed to root Samsung Galaxy S3 L710 are:

Step 1:How to Install Android 4.2.2 Jelly Bean on Sprint Samsung Galaxy S3 L710

First, connect your Samsung Galaxy S3 L710 to your PC using micro USB cable came with your Samsung Galaxy S3 L710.

Step 2:

Now, download SlimBean Built 3 ROM files on your PC.

Step 3:

Transfer the downloaded files to your Samsung Galaxy S3 L710.

Step 4:

Now, switch off your Samsung Galaxy S3 L710 and disconnect it from your PC.

Step 5:

Now, open up your Samsung Galaxy S3 L710 into CWM or TWRP Recovery mode (to open your Samsung Galaxy S3 L710 in CWM or TWRP Recovery mode just press & hold Power & Volume Up & Home keys at same time).

Step 6:

Now, once you are entered into Recovery menu, it is recommended for you to perform Wipe Data/Factory Reset because of the completed installation of current Android version.

Note:

In case of CWM recovery, you have to use Volume key in order to navigate inside Recovery Mode. And in case of TWRP recovery, you have to use touchscreen in order to navigate inside Recovery Mode.

Step 7:

Now, don’t forget to Wipe Cache Partition – Select Wipe Cache Partition option from Menu and click on Yes in order to confirm.

Step 8:

Now, from main menu inside Recovery Mode, select the option “install zip using sdcard”, and then select the option “choose zip using internal sdcard”, and then select SlimBean Built 3 ROM files and then select “Yes” to install the Android 4.2.2 Jelly Bean on your Sprint Samsung Galaxy S3 L710.

Step 9:

Now, after the completion of the installation process, just go back to the main menu of Recovery Mode.

Step 10:

Now, click on reboot system now in order to reboot your Samsung Galaxy S3 L710.

Step 11:

And now you have successfully updated your Samsung Galaxy S3 to Android 4.2.2 Jelly Bean.

So this is how you can install Android 4.2.2 Jelly Bean your Samsung Galaxy S3 L710. Just follow the simple steps and your Samsung Galaxy S3 L710 will be updated to Android 4.2.2 Jelly Bean.

Hope this article about how to install Android 4.2.2 Jelly Bean on Sprint Samsung Galaxy S3 L710 helped you.

Finished!

Imagesource

Reference:

How to Root Samsung Galaxy Note 2 Verizon

In this article we will tell you how to root Samsung Galaxy Note 2 Verizon. Here’s the complete procedure.

There are various Network Carriers which provide the network to the mobile phones. Some of them are Verizon, AT&T, Sprint, BTC, Digicel, Nextel, Claro, Tigo, etc. So if you are using a carrier and want to unlock any other carrier for free then just follow the steps given below in order to do so.

Samsung Galaxy Note 2 is one of the best phones launched by Samsung. It Contains 1.6 GHz Cortex-A9 Quad-core processor with 2 GB RAM, Android 4.1.1 Jelly Bean, 8MP Rear and 1.9MP Front camera, and many more exciting features.

So, here we will tell you how to root Samsung Galaxy Note 2 Verizon. But before starting with the procedure, please read disclaimer, pre-requisite & other important notes. So, let’s begin with this.

Disclaimer:

By rooting and installing a 3rd party custom ROM the warranty of your Samsung Galaxy Note 2 Verizon will be voided. We are not responsible if anything wrong happens in between the process. And just to be sure we would like to tell you that this article is only for Samsung Galaxy Note 2 Verizon, so don’t try it on any other mobile or if you want to then try it on your own risk.

Pre-requisite:

  1. Your Samsung Galaxy Note 2 Verizon must be at least 70-80% charged.
  2. Enable the USB debugging mode (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install drivers of Samsung Galaxy Note 2 Verizon or you can download Samsung Kies.

Steps to be followed to root Samsung Galaxy Note 2 Verizon are:

Step 1:How to Root Samsung Galaxy Note 2 Verizon

First download Rooting Kit of Samsung Galaxy Note 2 Verizon, CWM recovery & extract it on your PC.

Step 2:

Now Switch Off the mobile, remove battery & then plug it back. & boot your mobile in download mode (you can do this by pressing together Volume Down & Home button), & after that press Power button of your mobile till you get the android logo. To confirm press the Power button again.

Step 3:

Now from the Extracted folder, open up Odin.exe & connect your mobile to computer using USB cable. If you are doing it correctly then an ID:COM box will become blue.

Step 4:

Now click on the PDA button & select “recovery.tar” from the folder you’ve extracted earlier.

Step 5:

Now ensure that Auto Reboot & F. Reset Time options are ticked on Odin.

Step 6:

Now click Start button to initiate installation process. It will take some time so wait for completion of installation.

Step 7:

Now if you can see the PASS message then your mobile will reboot itself & when the mobile Vibrates then remove battery immediately & start your mobile after 2 minutes.

Now your Samsung Galaxy Note 2 Verizon is rooted & you can check Super app installed on your mobile & if you need to verify, download the Root checker application to verify it yourself.

That’s all. You’ve successfully rooted your Samsung Galaxy Note 2 Verizon.

Hope this article about how to root Samsung Galaxy Note 2 Verizon helped you.

Imagesource

Reference:

How to Root Samsung Galaxy Note 2 Sprint

In this article we will tell you how to root Samsung Galaxy Note 2 Sprint. Here’s the complete procedure.

There are various Network Carriers which provide the network to the mobile phones. Some of them are Verizon, AT&T, Sprint, BTC, Digicel, Nextel, Claro, Tigo, etc. So if you are using a carrier and want to unlock any other carrier for free then just follow the steps given below in order to do so.

Samsung Galaxy Note 2 is one of the best phones launched by Samsung. It Contains 1.6 GHz Cortex-A9 Quad-core processor with 2 GB RAM, Android 4.1.1 Jelly Bean, 8MP Rear and 1.9MP Front camera, and many more exciting features.

So, here we will tell you how to root Samsung Galaxy Note 2 Sprint. But before starting with the procedure, please read disclaimer, pre-requisite & other important notes. So, let’s begin with this.

Disclaimer:

By rooting and installing a 3rd party custom ROM the warranty of your Samsung Galaxy Note 2 Sprint will be voided. We are not responsible if anything wrong happens in between the process. And just to be sure we would like to tell you that this article is only for Samsung Galaxy Note 2 Sprint, so don’t try it on any other mobile or if you want to then try it on your own risk.

Pre-requisite:

  1. Your Samsung Galaxy Note 2 Sprint must be at least 70-80% charged.
  2. Enable the USB debugging mode (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install drivers of Samsung Galaxy Note 2 Sprint or you can download Samsung Kies.

Steps to be followed to root Samsung Galaxy Note 2 Sprint are:

How to Root Samsung Galaxy Note 2 Sprint

Step 1:

First download Rooting Kit of Samsung Galaxy Note 2 Sprint, CWM recovery & extract it on your PC.

Step 2:

Now Switch Off your Samsung Galaxy Note 2 Sprint, remove battery & then plug it back. & boot your Samsung Galaxy Note 2 Sprint in download mode (you can do this by pressing together Volume Down & Home button), & after that press Power button of your Samsung Galaxy Note 2 Sprint till you get the android logo. To confirm press the Power button again.

Step 3:

Now from the Extracted folder, open up Odin.exe & connect your Samsung Galaxy Note 2 Sprint to computer using USB cable. If you are doing it correctly then an ID:COM box will become blue.

Step 4:

Now click on the PDA button & select “recovery.tar” from the folder you’ve extracted earlier.

Step 5:

Now ensure that Auto Reboot & F. Reset Time options are ticked on Odin.

Step 6:

Now click Start button to initiate installation process. It will take some time so wait for completion of installation.

Step 7:

Now if you can see the PASS message then your Samsung Galaxy Note 2 Sprint will reboot itself & when the mobile Vibrates then remove battery immediately & start your Samsung Galaxy Note 2 Sprint after 2 minutes.

Now your Samsung Galaxy Note 2 Sprint is rooted & you can check Super app installed on your Samsung Galaxy Note 2 Sprint & if you need to verify, download the Root checker application to verify it yourself.

That’s all. You’ve successfully rooted your Samsung Galaxy Note 2 Sprint.

Hope this article about how to root Samsung Galaxy Note 2 Sprint helped you.

Imagesource

See Also:

How to Install Android 4.2.2 Jelly Bean on LG Optimus L9

In this article we will tell you how to install Android 4.2.2 Jelly Bean on LG Optimus L9. Here’s the complete procedure:

LG Optimus L9 is one of the best phones launched by LG. It Contains 1 GHz Cortex A9 Dual-core processor with 1 GB RAM, Android 4.0.4 ICS, 5MP Rear and VGA Front camera, and many more exciting features.

Note:

Before starting with the steps just make sure that LG Optimus L9 you have is rooted & ClockWorkMod Recovery is installed on it.

It is recommended that before starting with the topic you must read the disclaimer and pre-requisite.

Disclaimer:

By rooting, warranty of LG Optimus L9 you have will be voided. We are not responsible for anything wrong happens in between the process to LG Optimus L9 you have. And just to be sure that this article is only for LG Optimus L9, so don’t try it on any other mobile and if you want to then try it yourself.

Pre-requisite:

  1. Your mobile must be at least 70-80% charged.
  2. Enable the Debugging Mode(USB) (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install USB driver of LG Optimus L9.

Steps to be followed to root LG Optimus L9 are:

Step 1:

First, connect LG Optimus L9 you have to your PC using micro USB cable came with LG Optimus L9 you have.

Step 2:

Now, download SlimBean Built 3 ROM files on your PC.

Step 3:

Transfer the downloaded files to LG Optimus L9 you have.

Step 4:

Now, switch off LG Optimus L9 you have and disconnect it from your PC.

Step 5:

Now, open up LG Optimus L9 you have into CWM or TWRP Recovery mode (to open LG Optimus L9 you have in CWM or TWRP Recovery mode just press & hold Power, Volume Up and Home buttons at same time and release the Power Button When you get a vibration).

Step 6:

Now, once you are entered into Recovery menu, it is recommended for you to perform Factory Reset/Wipe Data because of the completed installation of current Android version.

Note:

In case of CWM recovery, you have to use Volume key in order to navigate inside Recovery Mode. And in case of TWRP recovery, you have to use touchscreen in order to navigate inside Recovery Mode.

Step 7:

Now, don’t forget to Wipe Cache Partitioning – Select Wipe Cache Partition option from Menu and click on Yes in order to confirm.

Step 8:

Now, from main menu inside Recovery Mode, select the option “install zip using sdcard”, and then select the option “choose zip using internal sdcard”, and then select SlimBean Built 3 ROM files and then select “Yes” to install the Android 4.2.2 Jelly Bean on your Sprint LG Optimus L9.

Step 9:

Now, after the completion of installation process, just revert back to main menu of Recovery Mode.

Step 10:

Now, click on reboot system now in order to reboot LG Optimus L9 you have.

Step 11:

And now you have successfully updated LG Optimus L9 you have to Android 4.2.2 Jelly Bean.

So this is how you can install Android 4.2.2 Jelly Bean LG Optimus L9 you have. Just follow the simple steps and LG Optimus L9 you have will be updated to Android 4.2.2 Jelly Bean.

Hope this article about how to install Android 4.2.2 Jelly Bean on LG Optimus L9 helped you.

Finished!

References:

How to Install ClockWorkMod Recovery on LG Optimus L9

In this article we will tell you how to install ClockWorkMod recovery on LG Optimus L9. Here’s the complete procedure:

LG Optimus L9 is one of the best phones launched by LG. It Contains 1 GHz Cortex A9 Dual-core processor with 1 GB RAM, Android 4.0.4 ICS, 5MP Rear and VGA Front camera, and many more exciting features.

So, here we will tell you how to install the ClockWorkMod recovery to LG Optimus L9. But before starting with the procedure, please read disclaimer, pre-requisite & other important notes. So, let’s begin with this.

Disclaimer:

By rooting and installing a 3rd party custom ROM the warranty of your mobile will be voided. We are not responsible if anything wrong happens in between the process. And just to be sure we would like to tell you that this article will only works on LG Optimus L9, so don’t try it on other mobile or if you want to then try it on your risk only.

Pre-requisite:

  1. Your mobile must be at least 70-80% charged.
  2. Enable the debugging mode (USB) (open “Settings” then “Manage Applications” then “Development” then “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install drivers of LG Optimus L9.

Steps to be followed to install CWM recovery to your LG Optimus L9:

Step 1:

First download Rooting Kit of LG Optimus L9, CWM recovery & extract it on your PC.

Step 2:

Now Switch Off the mobile, remove battery & then plug it back. & boot your mobile in download mode (you can do this by pressing together Volume Down & Home button), & after that press Power button of your mobile till you get the android logo. To confirm press the Power button again.

Step 3:

Now from the Extracted folder, open up Odin.exe & connect your mobile to computer using USB cable. If you are doing it correctly then an ID:COM box will become blue.

Step 4:

Now click on the PDA button & select “recovery.tar” from the folder you’ve extracted earlier.

Step 5:

Now ensure that Auto Reboot & F. Reset Time options are ticked on Odin.

Step 6:

Now click Start button to initiate installation process. It will take some time so wait for completion of installation.

Step 7:

Now if you can see the PASS message then your mobile will reboot itself & when the mobile Vibrates then remove battery immediately & start your mobile after 2 minutes.

Now your LG Optimus L9 is rooted & you can check Super app installed on your mobile & if you need to verify, download the Root checker application to verify it yourself.

Now since your mobile is rooted it’s time to tell you how to install CWM Recovery. To do that, just follow remaining steps.

Step 8:

Now place the “CWM recovery file” in your SD card.

Step 9:

Now switch off your mobile & boot it in recovery mode (you can do this by pressing together the Volume Up & Home button), & then press Power button.

Step 10:

Now from recovery menu, press install zip from SD card & go to the path where the CWM Recovery file you placed & select the file. The installation will take approximately 2 minutes.

Step 11:

After finishing the installation process go back & choose reboot the mobile.

That’s all. You’ve successfully installed the CWM Recovery.

Hope this article about how to install ClockWorkMod recovery on LG Optimus L9 helped you.

References:

How to Root Galaxy S3 Verizon on Mac

In this article we will tell you how to root Galaxy S3 Verizon on Mac. Here’s the complete procedure:

There are various Network Carriers which provide the network to the mobile phones. Some of them are Verizon, AT&T, BTC, Digicel, Nextel, Claro, Tigo, etc. So if you are using a carrier and want to unlock any other carrier for free then just follow the steps given below in order to do so.

Samsung Galaxy S3 is one of the best phones launched by Samsung. It Contains 1.4 GHz Cortex-A9 Quad-core processor with 1 GB RAM, Android 4.0.4 ICS, 8MP Rear and 2MP Front camera, and many more exciting features.

Note:

It is recommended that before starting with the topic you must read the disclaimer and pre-requisite.

Disclaimer:

By rooting, warranty of your Samsung Galaxy S3 Verizon will be voided. We are not responsible if anything wrong happens in between the process. And just to be sure that this article is only for Samsung Galaxy S3 Verizon, so don’t try it on any other mobile and if you want to then try it yourself.

Pre-requisite:

  1. Your mobile must be at least 70-80% charged.
  2. Enable the Debugging Mode(USB) (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install USB driver of Samsung Galaxy S3 Verizon or you can download Samsung Kies.

Steps to be followed to root Samsung Galaxy S3 Verizon are:

Step 1:

Connect your Samsung Galaxy S3 Verizon on your Mac using the data cable provided with your Samsung Galaxy S3.

Step 2:

Just, download Motochopper file and paste it to your Mac’s desktop.

Step 3:

Now, open the terminal and type the following commands to start rooting your Samsung Galaxy S3 Verizon.

  • cd Desktop
  • cd Motochopper
  • chmod 755 *
  • sudo sh run.sh

Step 4:

Once the scripting is started, just press enter to root your Samsung Galaxy S3 Verizon and don’t forget to allow the USB debugging.

Step 5:

Once the process is finished do not forget to press enter in order to reboot your Samsung Galaxy S3 Verizon.

Step 6:

When your Samsung Galaxy S3 Verizon is finished rebooting, just open the app drawer of your Samsung Galaxy S3 Verizon and make sure you have SuperUser app already installed on your Samsung Galaxy S3 Verizon. If you don’t have it, then you can download the app, and install it.

Step 7:

In order to confirm that your Samsung Galaxy S3 Verizon is rooted, install an app naming Titanium Backup, and check that whether you are getting a SuperUser request or not.

So, by following these simple steps you can root your Samsung Galaxy S3 Verizon on Mac.

Hope this article about how to root Galaxy S3 Verizon on Mac helped you.

Finished!

References:

How to Update HTC One X to 4.2.2 Jelly Bean

In this article we will tell you how to update HTC One X to 4.2.2 jelly bean. Here’s the complete procedure:

HTC One X is one of the best phones launched by HTC. It Contains 1.5 GHz Tegra 3 Quad-core processor with 1 GB RAM, Android 4.0.4 ICS, 8MP Rear and 1.3MP Front camera, and many more exciting features.

Note:

Before starting with the steps just make sure that your HTC One X is rooted and ClockWorkMod Recovery is installed on it.

It is recommended that before starting with the topic you must read the disclaimer and pre-requisite.

Disclaimer:

By rooting, warranty of your HTC One X will be voided. We are not responsible if anything wrong happens in between the process. And just to be sure that this article is only for HTC One X, so don’t try it on any other mobile and if you want to then try it yourself.

Pre-requisite:

  1. Your mobile must be at least 70-80% charged.
  2. Enable the Debugging Mode(USB) (“Settings” -> “Manage Applications” -> “Development” -> “USB Debugging”)
  3. Make sure that you’ve backed up all of the necessary data.
  4. And last but not the least install USB driver of HTC One X.

Steps to be followed to root HTC One X are:

Step 1:

First, connect your HTC One X to your PC using micro USB cable came with your HTC One X.

Step 2:

Now, download SlimBean Built 3 ROM files on your PC.

Step 3:

Transfer the downloaded files to your HTC One X.

Step 4:

Now, switch off your HTC One X and disconnect it from your PC.

Step 5:

Now, open up your HTC One X into CWM or TWRP Recovery mode (to open your HTC One X in CWM or TWRP Recovery mode just press & hold Power & Volume Down at same time).

Step 6:

Now, once you are entered into Recovery menu, it is recommended for you to perform Wipe Data/Factory Reset because of the completed installation of current Android version.

Note:

In case of CWM recovery, you have to use Volume key in order to navigate inside Recovery Mode. And in case of TWRP recovery, you have to use touchscreen in order to navigate inside Recovery Mode.

Step 7:

Now, don’t forget to Wipe Cache Partition – Select Wipe Cache Partition option from Menu and click on Yes in order to confirm.

Step 8:

Now, from main menu inside Recovery Mode, select the option “install zip using sdcard”, and then select the option “choose zip using internal sdcard”, and then select SlimBean Built 3 ROM files and then select “Yes” to install the Android 4.2.2 Jelly Bean on your Sprint HTC One X.

Step 9:

Now, after the completion of the installation process, just go back to the main menu of Recovery Mode.

Step 10:

Now, click on reboot system now in order to reboot your HTC One X.

Step 11:

And now you have successfully updated your HTC One X to Android 4.2.2 Jelly Bean.

So this is how you can install Android 4.2.2 Jelly Bean your HTC One X. Just follow the simple steps and your HTC One X will be updated to Android 4.2.2 Jelly Bean.

Hope this article about how to update HTC One X to 4.2.2 Jelly Bean helped you.

Finished!

Reference:

How to Connect Xperia Ion to PS3

In this article we will tell you how to connect Xperia Ion to PS3. Here are the complete details.

Sony Xperia Ion is one of the best phones launched by Sony Inc. Sony Xperia Ion contains 1.5 GHz Dual-core processor with 1 GB RAM, Android 2.3 Gingerbread, 12MP Rear and 1.3MP Front camera plus a large screen of 4.55 inch with a resolution of 1280×720 pixels and approx. 323 ppi pixel density, and many more exciting features.

Play Station 3 is a video game console created by Sony Computer Entertainment. It provides various HD games that users can play at their home and can share the music, pictures and videos too. It comes in various versions like 120 GB, 320 GB, 500 GB, etc. It is best in its class and competes well among the competitors.

Note:

In order to connect your Sony Xperia Ion and your PS3 you must have a working Wi-Fi.

It is recommended that before starting with the topic you must read the disclaimer and pre-requisite.

Disclaimer:

We are not responsible if anything wrong happens in between the process. And just to be sure that this article is only for Sony Xperia Ion, so don’t try it on any other mobile and if you want to then try it yourself.

Pre-requisite:

  1. Your mobile must be a little bit charged.
  2. Make sure that you’ve backed up all of the necessary data.

Steps to follow to connect your Sony Xperia Ion to your PS3 are:

Step 1:

Connect your PS3 and Sony Xperia Ion to the same Wi-Fi.

Step 2:

In your ps3, go to menu and select “Settings”, then open the “Network Settings”, then open “Media Server Connection” and at last select “Enable”.

Step 3:

Now, go to your Sony Xperia Ion’s menu and open SmartShare app & use bottom left touch key in order to open the Settings (if you’re already inside a ‘to’ or ‘from’ screen, then you can not access the Settings, so in that case you have to press the return key).

Step 4:

Now, inside the Settings menu, just enable your Sony Xperia Ion to be found and check on the preferred boxes (music, photos, videos, etc.).

Step 5:

Now, in your PS3 menu click on either Music or Pictures or Videos and then select the ‘Search for Media Servers‘ option.

Step 6:

Now, in your Sony Xperia Ion’s SmartShare menu make sure to allow devices having same IP address just as your PS3.

Step 7:

Now, your Sony Xperia Ion’s name must be appearing at top of playback list for each of the category.

Step 8:

Now, you can either select ‘Video’ in video section, ‘Music’ in music section or ‘Picture’ in pictures section etc.

Step 9:

Now your Sony Xperia Ion is successfully connected to your PS3. Enjoy sharing data.

So these are some simple steps that you have to follow to connect your Sony Xperia Ion to your PS3 successfully.

Hope this article about how to connect Sony Xperia Ion to PS3 helped you.

Finished!

Imagesource

Reference:

Rooting and upgrading Android devices